46
OGN-R PilotAware / Re: Updating from Release 20191008
« on: November 11, 2019, 10:36:04 pm »
It's not working at all now. Looks like I'll have to do a new install. Does the file stored at latest.zip have the 20191111 release?
You can view here all posts made by this member. Note that you can only see posts made in areas to which you currently have access.
Yep. I recently renewed my "experimental" station using new software on a new PI 3 and I got Wifi working almost immediately, no problems.
I edited the /etc/wpa_supplicant/wpa_supplicant.conf file for which you have to unlock the read/write and then edit the permanent one which is /etc_org/wpa_supplicant/wpa_supplicant.conf. So something like:
sudo /root/mount_rw.bash
sudo nano /etc_org/wpa_supplicant/wpa_supplicant.conf
Then add in lines with your SSID and password:
network={
ssid="<ssid>"
psk="<password>"
}
Then set read-only again:
sudo /root/mount_ro.bash
and reboot.
I've set up a static IP address as well on mine so I can easily find it and log on using SSH, but that's not necessary just for it to run.
I *think* this time around that's all I did and it connected to my Wifi. I'm not in Guildford at the moment so I don't know if this is exactly correct but if it doesn't work, come back and I'll check.