Hi Peter, thank you for getting back to me.
I have a classic, it's got the latest software, I'm connecting the FDTI to a Funke(Well it's a Filser TRT800A) that previously reported ADSB from an old Garmin GPS, NEMA 4800. Wiring is as before just reconnected.
I recently fitted remote antennas and relocated the unit under the panel and am still shaking it down, thought I'd add the PAW GPS to the TXP.
USB connections have been messed with as I moved them around as I didn't think initially the FDTI cable would fit alongside the TX/RX adaptor. However it does if you're careful. So I have lost track of what should go where though, this morning by finding an old classic manual, I have found where they started, that looks to be: Port 1 spare, port 2 TXRX, port 3 GPS, port 4 Wifi
Currently I have: 1-GPS, 2 TXRX, 3 FDTI, 4 Wifi
I allocated 3 to Funke 4800 and 1 to GPS (Seeing GPS was there, I have a GPS mouse connected).
So I can jig that all back to how it was originally, is that what I need to do? Are the ports allocated in code or somehow and expect the devices in the standard positions? Along with allocating port 1 to FDTI/Transponder Funke 4800.
I have been reading all I can find there are lots of manuals and documents.....
So that's what we have, do I need to move the USB's all back where they were and put the FDTI in 3 and the allocate that?
BTW, Funke are almost ready to do the update they have been suggesting for a few years though their last E mail said they had to order some component stock. That was a month ago, I'll give them a nudge this coming week.
Thanks, Regards, Clive