Upgrade built! Will be test flying it during the week.
Suggest anyone doing the upgrade drill the aerial holes with 7mm drill bit as the instructions say may be needed.
I have also cut the label down so that it doesn’t block any of the ventilation holes.
I kept my existing 5 dbi 1090 aerial, the kit comes with a 3dbi aerial.
Lastly as the case supplied is not one of the translucent ones, thus it is not possible to see the power and status lights, l will adding two 1 or 2mm holes to allow these to be seen.
It was nice not to have to drill, fill and file out holes! Also the SMA holes line up and will provide more support.
Would like to know how to enable the weather trial, I have a second low power SDR, and I know I will only get it when fly down south!
Also looking forward to when the artificial horizon is available...