Thanks Paul, I am doing the same (HDX upgrade). Thanks for your advice. I asked because in the OP is says:
> Configure the USB port on the Pilot Aware to output FLARM traffic and set it to 57600 baud.
I was wondering whether this wouldn't conflict with the settings required to supply to SkyDemon. So thanks for your confirmation that this is not the case.
From my reading I confirm all your other remarks regarding filtering on PAW, and your understanding of HDX' traffic treatment.
Hi Tim,
Sorry, I have been a bit preoccupied over the past few days and haven't been on the Forum, however @PaulSS has obviously been right on the ball (as usual - thanks Paul) and dealt with your enquiry.
The OP's advice re configuring the PAW Output for SkyView
is correct. Make sure you have identified
the correct PAW USB Port then configure it in PAW to 'Flarm Out and 57600 Baud'. Transmissions via the PAW WiFi Hotspot work completely independently, so the USB Port settings won't affect data sent via the PAW WiFi. That just works as normal.
Please let us know how you get on with your upgrade to HDX.
Best Regards
Peter