voice alert headset adaptor 3.5mm for your pilotAware

[cyberaction]

Hi All ,

If anyone is interested in purchasing standard GA headset adaptor for your pilotAware kit for Voice Alerts. This is available of ebay under this link below

http://www.ebay.co.uk/itm/Aviation-Headset-Adaptor-3-5mm-Male-MP3-Pilot-Aware-to-GA-Headset-/112205150917?hash=item1a1ff2bac5:g:yAwAAOSw5cNYKt0S

[Keithvinning]

Hi Thanks for this

I wonder how does it differ from this

http://www.ebay.co.uk/itm/371393836684?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

coupled with this and a 3.5mm cable which seems to be the same but a lot cheaper.

http://www.ebay.co.uk/itm/370613642151?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Does it have any impedance matching function or just a straight parallel the two cables together effect which is what the above plug does?

Does it have a DC block?

What headphones has it been tested on?

Cheers

Keith

[cyberaction]

Hi Keith ,

I got one and it works well. There is no block as such but works well.

[Keithvinning]

Thanks

Good to know but a bit expensive

What headset do you use David Clark?

Cheers

Keith

[Deker]

I have the same one as in Keiths link - works fine.

I have a 1/4" to 3.5mm cable so don't need the adaptor.

Deker

[Keithvinning]

Even better

The whole thing about the audio interface is that it will be different for each combination
We would welcome feedback so that we can collate a record of known good installations

Thanks

Keith

[cyberaction]

I use David Clark

[onebounce]

Would the arrangement in Keith's post only provide audio from PAW in the one headset ? I assume so ... and wondered if anybody had ideas for a simple arrangement to output the audio to both (front, David Clark) headsets ?

Thanks

Andy

[exfirepro]

Andy,

If your intercom has an auxiliary input, you should be able to connect PAW in that way. See this thread and/or search 'Audio Warning Connections' from the home page.

http://forum.pilotaware.com/index.php/topic,376.msg5117.html#msg5117

Hope this helps.

Regards

Peter