PilotAware
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length.
News:
GRID Network and ATOM Ground Station - Running across Europe
Home
Help
Search
Login
Register
PilotAware
»
British Forum
»
Technical Support
»
PAW, Dittel KRT2 and audio warnings
« previous
next »
Print
Pages:
1
[
2
]
Author
Topic: PAW, Dittel KRT2 and audio warnings (Read 12345 times)
Moffrestorer
Sr. Member
Posts: 317
Total likes: 14
Re: PAW, Dittel KRT2 and audio warnings
«
Reply #15 on:
October 06, 2016, 06:04:13 pm »
Further to my last post can you confirm that the audio signals you are trying to connect are being injected into the intercom auxiliary input? I cannot fathom why the VOX should exert any control over this path. The VOX will normally only control signals generated from the microphone inputs.
Logged
Smaragd
Full Member
Posts: 130
Total likes: 10
Re: PAW, Dittel KRT2 and audio warnings
«
Reply #16 on:
May 23, 2017, 10:49:26 pm »
Just realised that I never gave any feedback on the solution to this! I had been using high settings on the VOX (up to maximum) in the hope that would make the PAW signal audible. Discussion with Dittel alerted me to a fact that wasn't clear in the documentation. With a VOX setting of 1 (which I hadn't tried as one would expect it to give a low volume) allowed the PAW to be heard clearly. Any VOX setting above 1 has a "squelch" (not really the right term) or limiter feature which cuts out an input below a certain signal strength. Still not sure why, if the PAW signal is at adequate volume with VOX = 1, it's not strong enough to overcome the squelch at any other setting - but it works, so who cares!
Logged
Admin
Administrator
Hero Member
Posts: 3589
Total likes: 324
Re: PAW, Dittel KRT2 and audio warnings
«
Reply #17 on:
May 24, 2017, 07:09:45 am »
Thats great news, thanks for posting
Lee
Logged
Ian Melville
Engineering
Hero Member
Posts: 1234
Total likes: 72
Re: PAW, Dittel KRT2 and audio warnings
«
Reply #18 on:
May 24, 2017, 09:19:08 am »
Smaragd, what level have you got the volume set at in your PAW config screen? Sounds like you are trying to boost the volume at the radio, rather than the source. I needed to set PAW to 10, the max, for my Funke ATR833S.
«
Last Edit: May 24, 2017, 10:52:31 am by Ian Melville
»
Logged
exfirepro
Global Moderator
Hero Member
Posts: 2718
Total likes: 330
Re: PAW, Dittel KRT2 and audio warnings
«
Reply #19 on:
May 24, 2017, 09:33:55 am »
Smaragd,
Glad to hear you have got your setup working, though I would also be interested in the answer to Ian's question for future reference.
Regards
Peter
Logged
Smaragd
Full Member
Posts: 130
Total likes: 10
Re: PAW, Dittel KRT2 and audio warnings
«
Reply #20 on:
May 24, 2017, 04:27:36 pm »
I'm pretty certain that turning up volume to max on the PAW was my first step, but I will check next time I'm at the aircraft.
Logged
Smaragd
Full Member
Posts: 130
Total likes: 10
Re: PAW, Dittel KRT2 and audio warnings
«
Reply #21 on:
June 02, 2017, 05:24:01 pm »
Yes I was using full volume setting on the PAW. The resultant output at the headset is just right with the KRT2 set at EXT 1.
Logged
exfirepro
Global Moderator
Hero Member
Posts: 2718
Total likes: 330
Re: PAW, Dittel KRT2 and audio warnings
«
Reply #22 on:
June 02, 2017, 11:30:58 pm »
Smaragd,
That information will be very useful should anyone else find themselves with the same problem. Thanks for sharing.
Regards
Peter
Logged
Print
Pages:
1
[
2
]
« previous
next »
PilotAware
»
British Forum
»
Technical Support
»
PAW, Dittel KRT2 and audio warnings