Hi Paul,
For ADS-B and PilotAware(P3I), there is no configuration to be done within PilotAware.
All of the configuration is really within the navigation tool, and really the only thing I think you can alter is the
vertical height warning, this controls when traffic within a particular separation is displayed
for Mode-S there are 2 things to set :-
Mode-S Separation :-
this controls the relative height filter for Mode S warnings (Audio and traffic datasent to the navigation device)
Mode-S Detect
This controls the threshold for signal levels, there is still some research ongoing for the best selection
at the moment I would recommend leaving at medium, if you want to test, put it into the Ultra/Noisy mode
this causes low signal thresholds to provide a trigger
If you look at the 'traffic' menu then you will see the signal strength and whether they trigger an audio/visual
response. Remember this is ONLY for Mode-S, so if the traffic has co-ordinates that is not affected by these
settings
Thx
Lee
