Configure Logging Traffic
PilotAware (20151114), Expires 20161201
______________Interface______________ __________________Status__________________
NAVIGATION Off
Sorry the table formating gets lost in the cut n paste:-
ADS-B (DVB-T) Enabled Msgs=96199(+3526)
TRX (RXTX) Enabled TX=0 RX=0 CRCFAIL=0
Pressure Altitude (BMP) Unavailable (Manual) QNH=1013mb QNE=0ft GNSS=0ft
GPS Sentences (TCP) Msgs=0(+0)
GPS Sentences (UDP) Msgs=0(+0)
GPS Sentences (USB) Msgs=0(+0) Fix="Invalid" Mode="Undefined" Satellites=0
USB Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
USB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
USB Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
USB Bus 001 Device 004: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
USB Bus 001 Device 005: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
This is a NAV tool option to display traffic at certain height separation
Is this in PAW config, or are you refering to the Nav App running on the tablet.
I havent got as far as linking to RunwayHD yet as I want to see it logging ADSB and putting out NMEA sentences before trekking up the aircraft.