Hi Gramac,
Very unlikely that the update will have introduced any settings changes.
Three things to check.
1. As per both the above posts, the first thing to check is that your PilotAware has a GPS fix - without this it won’t send data to the transponder.
2. That you (still*) have the correct USB Port in your PilotAware configured to ‘Transponder Trig’ and that it is set to 4,800 or preferably 9,600 Baud.
Note, with the PAW Classic, this is usually Port 1, but with
Rosetta this is usually Port 2 as Port 1 is used for the GPS.
* The update wouldn’t change this, but if you had the unit away from the plane did you put everything back in the same Ports?
3. That you have GPS Input in the transponder set to NMEA-0183 and GPS Line Speed set to the same value as your PilotAware (preferably 9,600 baud).
More info in a recent thread here....
http://forum.pilotaware.com/index.php/topic,1997.msg21333.html#msg21333 especially the bit from item 3 on in that post.
Let us know how you get on.
Best Regards
Peter
(p.s. don’t know where you are but Wx looks
very windy for the first few days of next week
)