Hi Guy,
Have you read this thread? ...
http://forum.pilotaware.com/index.php/topic,819.msg9849.html#msg9849In particular, check that you are configuring the correct PAW USB Port - see my post in that thread (though from your screenshots it looks like you probably are)
This port should be configured to ‘Flarm-OUT’ - which you have done, assuming the correct port.
The Baud rate should be set to a minimum of 57600 Baud and most significantly,
this must be the same in both devices. This seems to be the major issue as you say you can’t change the Baud Rate in your device. What happens if you try selecting one of the other Source Devices? IIRC the Funke TM250 is a FLARM Traffic Device.
Finally, as this has caught out many in the past, make sure you haven’t got your wires crossed - ‘Data Out’ from PAW via the recommended FTDI cable is on the ‘
Orange’ wire - this goes to whatever wire is used on your device for ‘Data In’ , (with ‘Black’ from the FTDI as the ‘Ground’).
Please let us know how you get on with today’s testing.
Regards
Peter