Hi
It took me a while to get around to it, and I had some problems, but EGBKE is now running v20190429. New Pi (3B) and existing 2 x Flight Aware Pro Plus dongles, 1 connected by an active USB extension.
I started with a fresh image and booted up, ran the config script and had quite a bit of an issue with the Eprom serial numbers part. After multiple runs of the script and multiple reboots I ended up with 1 dongle that rtl_eeprom would not recognise, because it ended up with a Vendor Id of 0ba0 rather than 0bda! I am not sure how, rtl_eeprom doesn't even let you set the vendor id other than by a total eeprom upload. Anyway, a hack of rtl_eeprom to recognise 0ba0 as a valid rtl, read the eeprom of the working dongle, write it to the non working dongle, manually set the serial numbers - and the script then flew through.
FR24 package installed using the 360Radar dump1090 already running and then looks to work well. fr24feed.ini if it is of help to others:
receiver="avr-tcp"
fr24key="xxx"
bs="no"
raw="no"
logmode="1"
mlat="yes"
mlat-without-gps="yes"
And finally, an motd updated for the new box to remind me where everything is:
service rtlsdr-ogn status
Daemon - /etc/init.d/rtlsdr-ogn
Config - /etc_org/rtlsdr-ogn.conf
Cron - /home/pi/rtlsdr-ogn/PilotAware-OGN.update.sh to /tmp/PilotAware-OGN.crontab.log
OGN RF - /home/pi/rtlsdr-ogn/ogn-rf
Config - /home/pi/rtlsdr-ogn/rtlsdr-ogn-paw.conf
Web - http://ognpaw:8080/
Out - netcat localhost 50000
OGN Decode - /home/pi/rtlsdr-ogn/ogn-decode
Config - /home/pi/rtlsdr-ogn/rtlsdr-ogn-paw.conf
Web - http://ognpaw:8081/
Out - netcat localhost 50001
PilotAware - /home/pi/rtlsdr-ogn/PilotAware-OGN.exe
Config - /home/pi/rtlsdr-ogn/PilotAware-OGN.config.dat
Web - http://ognpaw/
Out - netcat localhost 50002
Log - /tmp/conn360.txt
360 Radar Dump1090 - /home/pi/360Radar/start1090
Config - /etc_org/default/360r-mlat-test-svr2
Config - /home/pi/360Radar/360r-mlat-test-svr2
Out - netcat localhost 50003
Changes - added --stats-every 5 to /home/pi/360Radar/start1090
Virtual Radar - /home/pi/vrs/startvrs
Config - /home/pi/.local/share/VirtualRadar.org/Configuration.xml
Web - http://ognpaw:9000/VirtualRadar/desktop.html
service 360r-mlat-test-svr2 status
360 Radar Mlat
Daemon - /etc/init.d/360r-mlat-test-svr2
Config - /etc_org/default/360r-mlat-test-svr2
Log - /var/log/360r-mlat-test-svr2.log
service fr24feed
Flight Radar 24 Feed
Daemon - /etc/systemd/system/fr24feed.service
Config - /etc_org/fr24feed.ini
Log - /var/log/fr24feed/fr24feed.log
Cron - /etc_org/cron.d/fr24feed_updater to /var/log/fr24feed_update.log
Status - /usr/bin/fr24feed-status
Web - http://ognpaw:8754/
Cheers
Kev