Hi
Little snag spotted - not sure if it's by design or not so I thought I'd mention it..
The upgrade to the Pi3 has meant re-setting up the Aircraft profiles for the machines I fly …
I've changed the SSID of the PAW to something a little more suitable, and it's fine on the profile I've created for the first machine
When creating a profile for a second machine, the SSID reverts to the 'stock' one (ie, the one containing the MAC address) and the PAW then won't connect when that profile is selected until the Wifi is reconnected manually to the 'new' wifi hotspot
Updating the SSID in the second profile so it's the same as the first seems to cure this and you can switch between profiles normally … (ie, without having to reconnect to a different hotspot)
Apologies if this has been mentioned before ….
Cheers