Author Topic: External Antenna for P3i transmission  (Read 2675 times)

Ian Melville

External Antenna for P3i transmission
« on: May 29, 2016, 09:00:48 am »
We already have a spare hole for an External Antenna on our group aircraft. Is there a recommended antenna that can be cut to the correct size?

Admin

Re: External Antenna for P3i transmission
« Reply #1 on: May 29, 2016, 09:29:06 am »
Hi Ian

AHT will be selling a suitable extension cable to extend the reach.
Also antenna types of monopole, end-fed, and centre-fed dipoles

If your plane is metal, then you can use the monopole, the plane will act as ground plane,
Otherwise the end fed dipole

Thx
Lee

Ian Melville

Re: External Antenna for P3i transmission
« Reply #2 on: May 29, 2016, 11:31:26 am »
It rag and tube (PA17), but there is a sufficient large metal fairing that is big enough to act as the ground plane. The VHF works fine on the same position of the other wing root.

Most monopoles I have seen or have in the bits box are not suitable for external use I.e. won't handle water ingress.