Author Topic: Rosetta suddenly stops working  (Read 1273 times)

mariko

Rosetta suddenly stops working
« on: July 31, 2022, 12:51:16 pm »
My Rosetta don't works anymore.
GPS and 1090 are always in "unavailable" red condition.
Voltage starts "ok" but revert in "error" in a few

I already tried:
- changed 2 different GPS dongles
- Formatting SD and reinstalling software
- changing many different power sources

What can I do? Help me, please!
« Last Edit: July 31, 2022, 06:51:24 pm by mariko »
Ciao
  Mariko

mariko

Re: Rosetta suddenly stops working
« Reply #1 on: July 31, 2022, 12:52:21 pm »
Screenshots here
« Last Edit: July 31, 2022, 06:51:40 pm by mariko »
Ciao
  Mariko

steveu

Re: Rosetta suddenly stops working
« Reply #2 on: July 31, 2022, 09:48:05 pm »
Investigate the voltage error and see what happens when that is solved.

Are you using the right PAW power supply, and is the connection secure?

Have you checked the cable is properly seated?

Have you replaced the lead and is it of a sufficient gauge of wire?

Admin

Re: Rosetta suddenly stops working
« Reply #3 on: July 31, 2022, 09:54:15 pm »
After the suggestion by Steve, check if one of the usb devices have go e faulty pulling down the power
After seeing the voltage error, unplug the GPS and SDR
Does the voltage error continue?

mariko

Re: Rosetta suddenly stops working
« Reply #4 on: August 01, 2022, 05:05:06 pm »
After the suggestion by Steve, check if one of the usb devices have go e faulty pulling down the power
After seeing the voltage error, unplug the GPS and SDR
Does the voltage error continue?
Thanks for suggestion, you are right.
I discovered that unplugging the 1090SDR cause the Status revert to green, voltage to OK and GPS came back alive (see screenshot).
I dont have another Rosetta for testing, so I must assume that the SDR is broken.
What SDR must I buy as spare part and where i can found it? I live in Italy
Ciao
  Mariko

Admin

Re: Rosetta suddenly stops working
« Reply #5 on: August 01, 2022, 06:33:37 pm »