Airnav pro no flarm connection

[tfede]

Hi all,

does anyone have problems in connecting FLARM in Airnav Pro ?

All my settings are ok but i think i am forgetting something, when i switch FLARM to on in Airnav Pro the indicator changes to yellow for a while and than to red. This happens cyclically and never ending.

Federico

[Joerg]

Hi Federico,

I have the same problem then You descriped.
I got it working 2-3 times with Air Nav Pro. But after
some seconds the connection was lost again.
I ordered a different dvbt stick to check if that helps.

Will let You know when it arrived and I have tried it.

BR
Joerg

[iang]

May I suggest you download the latest pi software from the Pilotaware site especially if you downloaded it not long after it was uploaded by Lee as it was shortly replaced with a more reliable version (same version number) - I found this solved all my problems with getting the system to work (well not quite as I have an aerial issue).

iang

[Joerg]

My Version is from the 19th October, so the latest I think.

[Admin]

I have seen these problems also.

The following works for me.

1. Connect WiFi PilotAware
2. Startup Air Nav Pro
3. Go to Configuration->Sensors->Flarm-Connect
3.1 Slide sensor to OFF (green to grey)
3.2 Delete Pin Code and re-enter: 6001
3.3 Delete IP Address and re-enter: 192.168.1.1
3.4 Delete Port Number and re-enter: 2000
!!!!! Even if the values are correct, they must be removed and re-entered !!!!!
4. Slide sensor to ON
5. Go to Map

I have no idea why this is, but it works for me every time when I do this
Let me know if this works for you

Thx
Lee

[tfede]

thx lee, this way it works !

Federico

[Admin]

thx lee, this way it works !

Federico

I did report this to the folks at AirNavPro, maybe some more reports will get this fixed ?
Thx
Lee

[tfede]

I will report the same  but frankly speaking, i never got an answer from their "custmer suport"...

I'll let you know

Federico

[Admin]

I will report the same  but frankly speaking, i never got an answer from their "custmer suport"...

I'll let you know

Federico

They also have a facebook page which people post issues

Thx
Lee

[Joerg]

Thx Lee, it's working for me too!

Joerg