Author Topic: Low audio level  (Read 2505 times)

comanchebob

Low audio level
« on: August 04, 2018, 12:02:47 am »
Rosetta working great but audio level (set at 10) is very low compared to my old device using the same input. Any sussestions?

Ian Melville

Re: Low audio level
« Reply #1 on: August 04, 2018, 08:08:06 am »
1. Direct feed into an Audio panel or intercom
2. Bluetooth Adaptor with appropriate headset.
3. Feed a small amplifier.

If you check through the forum, you should find reports on this.

Keithvinning

Re: Low audio level
« Reply #2 on: August 06, 2018, 05:04:45 pm »
Hi

There should be no difference in the volume between the Pi 2B used in the Classic and the 3B used in the Rosetta. What are you feeding it into?

Some folks get  good results putting the following amplifier in series. It has a volume control and is not expensive

https://www.amazon.com/Neoteck-Headphone-Amplifier-Rechargeble-Computers/dp/B01MS22YWV

Anyone else have any experience they can share?