Recent Posts

Pages: 1 ... 4 5 [6] 7 8 ... 10
51
Technical Support / Re: Problem Receiving FLARM With Rosetta in France
« Last Post by steveu on March 27, 2024, 08:01:08 pm »
Quote from: DY691 on March 27, 2024, 06:24:22 pm
Good evening
I fly in France and unfortunately there are very few ATOM stations, if any at all...
I think that the flarm signals are recovered via the OGN by the network of my GSM and transmitted by rs232 and wifi to the Dynon and aircrew screens.
In the last few days these signals have disappeared from the Rosetta, hence my question.

Rosetta doesn't use the OGN. Reasons are explained elsewhere. OGN derived FLARM signals aren't therefore a Rosetta issue.

There is a big issue with the OGN that until the stations are all manually updated, there will be a loss of functionality.

In order to receive FLARM via iGrid you'd need some way of injecting it into iGrid?

From the PAW site:

Latest Software Release : 20230316
52
Technical Support / Re: Problem Receiving FLARM With Rosetta in France
« Last Post by DY691 on March 27, 2024, 06:24:22 pm »
Good evening
I fly in France and unfortunately there are very few ATOM stations, if any at all...
I think that the flarm signals are recovered via the OGN by the network of my GSM and transmitted by rs232 and wifi to the Dynon and aircrew screens.
In the last few days these signals have disappeared from the Rosetta, hence my question.
53
Technical Support / Re: FX data in and out - Skyview Compatible for both?
« Last Post by russp on March 27, 2024, 03:45:32 pm »
So common ground wasn’t the problem. The Skyview still can’t see the Pilot Aware FX. I’ve wired the input and output cables from the FX as per the Farm diagram above and connected these to the same pins has used for the USB to RS232 cables that the Rosetta successfully was using.I’ve run out of ideas now and other than concluding that the FX unit is supplying incompatible data and is unable to receive the NMEA data in. I don’t know where to go?
54
General Discussion / Re: Aircrew.co.uk and PilotAware Playback Sites
« Last Post by steveu on March 27, 2024, 12:04:42 pm »
Quote from: BobD on March 27, 2024, 11:15:10 am
Hi Steve, I had tried that site (and just tried again), but i couldn't get it to work with a PAW .trk file, it returns "No valid GPS Data detected", whichever output option is chosen.

Yes, I checked it out last night, and have emailed the developer.

It has worked with .trk files in the past as stored emails verified.

I'll keep you posted.
55
General Discussion / Re: Aircrew.co.uk and PilotAware Playback Sites
« Last Post by BobD on March 27, 2024, 11:15:10 am »
Hi Steve, I had tried that site (and just tried again), but i couldn't get it to work with a PAW .trk file, it returns "No valid GPS Data detected", whichever output option is chosen.

Sadly https://playback.pilotaware.com/playback/ is still not getting past the upload phase, to display the track, on any of my devices......
56
General Discussion / Re: Aircrew.co.uk and PilotAware Playback Sites
« Last Post by SGS66 on March 26, 2024, 09:05:36 pm »
I would not be surprised if FlySto is getting mode s traffic also, as the near miss I had two years ago was with an old PA28-140 and I’d be surprised if it was sporting ADSB. I have the reg and details from FlySto as all I uploaded was my old SkyDemon .kml file to check on the close encounter.
57
Technical Support / Re: External antenna gps - ok to mount on an aluminium bracket?
« Last Post by Martino on March 26, 2024, 06:19:20 pm »
Great stuff, thank you for the prompt feedback  :)
58
Technical Support / Re: External antenna gps - ok to mount on an aluminium bracket?
« Last Post by PaulSS on March 26, 2024, 06:06:22 pm »
 All will be well  :)
59
Technical Support / Re: Problem Receiving FLARM With Rosetta in France
« Last Post by steveu on March 26, 2024, 04:59:19 pm »
Quote from: DY691 on March 26, 2024, 04:35:21 pm
Good evening
Is it possible to have an idea of how long it will take for the flarms to reappear on rosetta?
my latest version is 20230316 maybe I forgot to update...
Bonne soirée

AIUI it's not a Rosetta function - Rosetta gets FLARM traffic from the ATOM ground stations which do the decoding from FLARM and uplink as P3i(PilotAware protocol).

The ATOM stations are all automatically updated whenever PilotAware HQ releases new software to them - no one has to anything.

If you're not seeing FLARM on Rosetta, are you near ground stations?
60
Technical Support / Problem Receiving FLARM with Rosetta (in France)
« Last Post by DY691 on March 26, 2024, 04:35:21 pm »
Good evening
Is it possible to have an idea of how long it will take for the flarms to reappear on rosetta?
my latest version is 20230316 maybe I forgot to update...
Bonne soirée
Pages: 1 ... 4 5 [6] 7 8 ... 10