Messages

31

Technical Support / Connecting TRX 1500 to Aircrew for using Flarm modul

« on: May 12, 2022, 05:35:46 pm »

Hello
I am installing a TRX 1500 module in my machine. I already have an Aircrew in my machine connected to a Rosetta.
The TRX 1500 has a Flarm module and I want to connect it to the aircrew via the RJ45 socket.
Unfortunately there is no RJ45 output in the TRX 1500.
the link is made through a DB15 socket I enclose the manual the links are described on pages 16 17 18
Thank you for your advice
Sincerely
Guy Ferrer

32

Technical Support / Re: Radar page blank

« on: August 25, 2021, 04:11:35 pm »

Well done Peter
The correct radar page screen came back after clearing the internet history on the iPhone

33

Technical Support / Re: Radar page blank

« on: August 23, 2021, 05:17:09 pm »

Thank you Peter for your help.
Indeed I think I remember that his battery was not full at the time of the test with an alarm on the home page, after recharging the battery the data appeared well in the traffic page, but the damage was already done and although we connected on the address 192.168.1.1 the page on his iPhone is still white, On my iPhone X version 14.7.1 everything was ok.
As soon as I'm in contact with my friend we'll try to review everything.
To answer the initial question his browser is safari.
Have a nice evening
Guy

34

Technical Support / Re: Radar page blank

« on: August 22, 2021, 04:57:53 pm »

Thanks for your help
iPhone 5s IOS 14.7.1

35

Technical Support / Re: Radar page blank

« on: August 21, 2021, 09:43:41 am »

Thank you for your answer
We will check the zoom settings and the equivalent of the desktop site...for iphone
What bothers me a little is that when we try to press the different buttons nothing happens ....

36

Technical Support / Radar page blank

« on: August 20, 2021, 06:28:44 pm »

Hello to all
A friend who just received a Rosetta has a problem with the display of the radar page on his iPhone and iPad. The configuration is now correct on his iPad but the problem remains on the iPhone
The different buttons don't seem to work, the page remains blank despite pressing the Disp.... buttons
Attached his configuration page and a copy of the radar page.
The Rosetta works correctly and the traffic page shows the other devices well...
Thanks for your help

37

French Specific Forum / Re: Bienvenue

« on: April 24, 2021, 05:43:06 am »

Je ne sais pas si le stratus est meilleur que le Rosetta pour les modes S/C  l’avantage du stratux est l’affichage des flarms, chose que l’on ne peut avoir en France du fait du faible réseau de station sol...
Je ne comprend d’ailleurs pas pourquoi le Rosetta ne permet pas de « voir » les flarms en direct

38

French Specific Forum / Bienvenue

« on: March 27, 2021, 11:48:15 am »

Bonjour à tous
je me lance ...j'ai installé un Rosetta dans ma machine WT9 Dynamic relié au Dynon HDX par un cable usb/rs232.
les infos adsb sont bien transmises au Dynon sauf les immatriculations...
j'ai bien une alarme traffic lors de la détection des mode S/C mais sans étiquettes de couleurs(rouge,jaune,vert) une annonce vocale passe dans mon casque par un cable entre le Rosetta et le boitier interphone.
j'ai également installé un horizon de secours Aircrew intégré au tableau de bord relié en wifi au Rosetta.
la partie Horizon n'est pas exploitable à l'heure actuelle (ok si avion stabilisé mais les infos sont fausses si virages accelerations...) l'avantages du boitier Aircrew est la possibilité de pouvoir afficher l'équivalent de la page radar du Rosetta (adsb avec immat étiquettes mode S/C avec code de couleurs)
Pas de positionnement des modes S/C ni flarms possible avec le Rosetta le nombre de stations sol est trop faibles...pour cela il faudra s’orienter vers le stratux...

39

General Discussion / Re: Aircrew Traffic Display

« on: August 30, 2020, 07:37:55 pm »

Yes it’s me 

40

General Discussion / Re: Aircrew Traffic Display

« on: August 30, 2020, 04:23:59 pm »

Hello to all
I have just acquired an aircrew module.
the functionning seems to be correct I'm waiting for the final placement in the dashboard to check the horizon function.
I was not able to obtain a correct magnetic heading identification...25 to 30 degrees of error after the calibration.
I have a question in the traffic function I only see adsb devices with no s-mode or c-mode, where are these detected and displayed on the module, if so how?
I am connected by wifi with a rosetta on which I have made all the traffic visible.
Thank you for your help

41

Technical Support / Re: Connecting Pilot Aware to SkyView

« on: July 02, 2020, 04:53:33 pm »

 Bravo

42

Technical Support / Re: Connecting Pilot Aware to SkyView

« on: July 02, 2020, 12:52:24 pm »

Hello, Lee.
Thank you for your message, it would have been very useful to have the positions by means of a circle around my S /C mode position.
I hope it won't be too difficult to integrate this new feature in the next update

43

Technical Support / Re: Connecting Pilot Aware to SkyView

« on: June 30, 2020, 10:06:21 pm »

Good evening
I flew today and unfortunately even when selecting the tm 250 mode there is still no S/C traffic on the skyview ...
The tm 250 mode behaves like the flarm adsb mode ok on the skyview.

44

Technical Support / Re: Connecting Pilot Aware to SkyView

« on: June 27, 2020, 06:05:28 pm »

Thank you Exfirepro
Sorry if I'm not clear in what I'm saying ( in France we're not too good in langage
In fact I have read the various speakers on these subjects and I thank them for this valuable information.
I configured port 2 of the Rosetta in flarm out and connected port 3 of the Dynon with the orange wire of the rs232 plug.
I can see the adsb traffic on the Dynon and I can receive the C/S traffic and voice information in my helmet via Bluetooth.
My question concerns the possibility to receive C/S traffic visually on the Dynon through a circle around my position As it was the case before in my old machine equipped with a trx1500 and a Dynon
My comment about receiving traffic in Garmin Tis mode is that on the Dynon I cannot access the baud rate settings in this mode while I can in the other modes.
Today I tried a little bit all the possible combinations between the Dynon mode (there are many) and the Rosetta mode. And nothing conclusive the tx increases well but I still have the traffic message made on the Dynon.
There is a case where I saw the tx and rx increase but without any increase in the number of good sentences and no traffic fail message.
My question to have an increase in the number of Good sentences is it necessary that the Rosetta receives other traffic?
I was on a small field with zero traffic around....
I'll try the funke TM250 mode in the next few days and let you know.

Guy

45

Technical Support / Re: Connecting Pilot Aware to SkyView

« on: June 26, 2020, 07:50:08 pm »

Thank you Lee for that initial response.
When you talk about increasing the baud rate, are you talking about the ones I select for port 2 on the Rosetta?
Because I don't have access to this setting (Garmin tis) on the skyview weirdly while I have access to the other settings?
Also, can I leave port 2 on auto or is another mode more appropriate?
I'll try different speeds tomorrow and let you know.
Have a good night.
Guy