Messages

1

Technical Support / Radio interference

« on: March 31, 2021, 10:12:10 am »

Hi, I am having an issue with constant radio interference when I connect the power supply to my Rosetta. I do have an Anker power supply. I have switched off each of the following in turn, but it does not change anything, Trig21 Strobes gps for ipad aware gps. The only way to cancel out the noise is turn the squelch up on my radio, but then I cant transmit.
Anyone with a magic wand out there who could help please.
Cheers Chris

2

Technical Support / Re: Connecting RS232 cable to Rossetta

« on: February 07, 2021, 09:20:19 pm »

Hi Peter, that’s very helpful, hope I can’t sort without too much trouble.
Be in touch.
Cheers Chris.

3

Technical Support / Re: Connecting RS232 cable to Rossetta

« on: February 06, 2021, 10:01:15 am »

Hi Peter, forgot to mention, I have a trig 21 and I fly a SkyRanger Nynja.
Chris.

4

Technical Support / Re: Connecting RS232 cable to Rossetta

« on: February 05, 2021, 07:59:45 pm »

Hi guys, many thanks for the effort you’re putting in. I will take screen shots when I’m next at the airfield, hopefully this Monday.
Many thanks again.
Chris

5

Technical Support / Re: Not picking up adsb out or mode c/s

« on: February 05, 2021, 07:58:34 pm »

Hi guys, many thanks for the effort you’re putting in. I will take screen shots when I’m next at the airfield, hopefully this Monday.
Many thanks again.
Chris

6

Technical Support / Not picking up adsb out or mode c/s

« on: February 05, 2021, 08:59:34 am »

I have retained the classic so as I could test the adsb out for the BMAA mod, but am finding that all I’m getting is both the Rossetta and classic showing P in the mode section and all zeros in the adsb status, is this because I’m attempting this whilst the aircraft is in the hanger?
Cheers
Chris

7

Technical Support / Re: Connecting RS232 cable to Rossetta

« on: February 04, 2021, 08:57:10 pm »

Hi Peter,
I misunderstood initially which cable you were talking about, it wasn’t until I attempted to remove the nano that I saw you could remove that and make space for rs232 cable.
I have retained the classic so as I could test the adsb out for the BMAA mod, but am finding that all I’m getting is both the Rossetta and classic showing P in the mode section and all zeros in the adsb status, is this because I’m attempting this whilst the aircraft is in the hanger?
Cheers
Chris

8

Technical Support / Re: Connecting RS232 cable to Rossetta

« on: January 31, 2021, 05:34:53 pm »

Hi Guys, have checked the cable and it is the correct one, I just didn’t think to cut of the protective cover. I can’t send a photo as it is at the airfield.
Cheers Chris.

9

Technical Support / Re: Connecting RS232 cable to Rossetta

« on: January 30, 2021, 11:50:48 pm »

Hi Peter, I’m sure it’s the one that was recommended when I bought the classic. I didn’t think to cut of the casing, so will that a go.
Many thanks for your help.
Cheers
Chris

10

Technical Support / Re: Connecting RS232 cable to Rossetta

« on: January 30, 2021, 09:39:56 pm »

Hi Peter,
Yes, as you described, however my RS232 plug is too wide, it will plug in if there isn’t any others plugged in next to it, so I may have to get a short extension.

Cheers Chris.

11

Technical Support / Connecting RS232 cable to Rossetta

« on: January 30, 2021, 04:54:22 pm »

Hi, just upgraded to a Rossetta, but I’m having difficulty in connecting the RS232 cable for ADSB OUT to a usb socket as other items that are using the other usb sockets are in the way, is there some sort of adaptor? can anyone help please.
Many thanks,
Chris

12

Technical Support / Re: New Pi3b

« on: July 15, 2019, 03:46:25 pm »

Will do.
Many thanks

13

Technical Support / New Pi3b

« on: July 15, 2019, 02:14:40 pm »

Hi, I've just purchased a Pi3b to replace my Pi2 and I believe I have to give you my old and new MAC address so you can give me new license details.
If this is correct do I send details via an email or through the forum and finally how much would it cost?
Many thanks.

14

Technical Support / Re: 3D

« on: July 09, 2019, 02:56:42 pm »

 Hi, thanks for replies. Did read it, but I'm afraid I'm a bit old in the tooth and it takes a while to understand tech stuff until I've played with it a while.

15

Technical Support / 3D

« on: July 09, 2019, 11:43:06 am »

Hi, I have downloaded the new software and I can see the config page shows MODE=3D, but when I look at the radar it appears as 2D. Can anyone help please.
Many thanks,
Chris.