Messages

1

Technical Support / Re: Rosetta Interference

« on: October 22, 2019, 05:34:34 pm »

Hi all
I believe that the problem has been fixed by the insertion of a Ground Loop Noise Isolator in the circuit.

Thank you all for your support

Kevin

2

Technical Support / Re: Rosetta Interference

« on: October 01, 2019, 10:48:34 am »

Thanks for the info.  I am pretty sure now the the noise is from the alternator.  I am awaiting delivery of a suppressor and will have to try that., Cheers

3

Technical Support / Re: Rosetta Interference

« on: September 29, 2019, 02:35:03 pm »

A65 with starter and alternator

4

Technical Support / Re: Rosetta Interference

« on: September 28, 2019, 04:54:16 pm »

Hi
I forgot to add that this noise is present only when the engine is running.

5

Technical Support / Re: Rosetta Interference

« on: September 25, 2019, 12:23:25 pm »

Thank you for all the suggestions.  My audio lead is a 3 pole so I will try a 4 in the first place and see what happens.  I did not use the Anker for other appliances at the same time.

6

Technical Support / Re: Rosetta Interference

« on: September 24, 2019, 12:40:49 pm »

Hi

The power source is using an Anker cig. lighter and the lead supplied with the Rosetta. Audio out is via a 3.5mm stereo lead from the PAW to to a Lynx intercom/radio aux in. The complete Lynx system including headsets is used.I have not tried any other power source. I have though tried 3 different Anker 4.8A charger with similar effects.
The interference does not sound like an audio feedback

7

Technical Support / Rosetta Interference

« on: September 24, 2019, 10:21:50 am »

I have a Rosetta which initially worked however, now with the power cord attached to the prescribed power scource it produces a loud howl from the audio out. Has anyone an idea which would help ?