Messages

1

Technical Support / Re: ADS-B out on both transponder AND PAW

« on: October 11, 2020, 02:07:10 pm »

Thanks!

2

Technical Support / Re: Power Supply

« on: October 11, 2020, 01:55:26 pm »

I did some testings, 5V is fine, more important is that the socket is able to do the 2.1 and not let drop the voltage below 5V.
I tested some Aliexpress sockets that looked to be the same as your picture, during high current drain the voltage dropped below 5.

 

3

Technical Support / ADS-B out on both transponder AND PAW

« on: October 11, 2020, 01:46:13 pm »

As a newbie i tried to find the answer on my question in the manual and on the forum, but unfortunately couldn't find what i was looking for.

I fly a paramotor trike equipped with a Trig TT21 transponder that's connected to a Trig TN72 ADS-B out unit.

After installing PAW Rosetta i will be transmitting 2X ADS-B out. (if i'm right?) 
I can imagine that this is not useful or maybe even can be confusing.
If so I prefer to transmit the Trig data and not the PAW ADS-B data.
But couldn't find the settings in PAW to do so.

Please help me out any advice is welcome.

Jeroen