Messages

1

Technical Support / Bluetoothing Headset to the new upgraded Rosetta

« on: July 19, 2019, 03:31:37 pm »

Instructions to blue tooth headset to the  new
Upgraded Rosetta .
Any info would be appreciated
Thanks
Colin

2

Technical Support / Re: New update new upgrade via Router

« on: July 02, 2019, 08:49:03 pm »

Many thank Neil👍

3

Technical Support / New update new upgrade via Router

« on: July 02, 2019, 06:24:43 pm »

Reading the instructions for a automatic software upgrade.
All seem straight forward upto
“After 20mins the software is downloaded to the PI,but the download
Needs to be implemented.This done by selecting install”
Where and how do I do this ??)
I assume after the download,I put back all the dongles etc and
Connect to my iPad To implement?
The information given is not too clear on this area of the process
If anyone can advise I would be grateful......
Many thanks
Colin

4

General Discussion / Re: Rosetta having crackling interference on voice warning

« on: January 03, 2019, 03:23:19 pm »

Hi Peter & Lee

Many thanks to you both for your help and guidance.
Lee, I am not sure if my headset is BT version .How would I know or find out.
Cable free would be a bonus.when do you foresee
The upgrade?
Peter,
I had already ordered a Ground Loop Isolater from
Ebay same model as Paul suggested.Fingures crossed🤞
Let you know how I get on.

Regards
Colin

5

General Discussion / Re: Rosetta having crackling interference on voice warning

« on: January 03, 2019, 09:46:31 am »

Hi Paul
Many thanks for your suggestion. The link you sent is based
in OZ will search for a British supplier first.
Cheers
Colin

6

General Discussion / Rosetta having crackling interference on voice warning

« on: January 02, 2019, 11:50:56 pm »

First test flight today all went well with PAW and ADS-B out linked with Trig TT21
Apart from cracklings interferience with the PAW voice warning facility.
I am using Lightspeed ANR headset, I am connecting
The headset to PAW with the 3.5mm cable supplied with the headset.
Any suggestions would be appreciated.
Many thanks
Colin

7

Technical Support / Re: ADS-B connection to Trig TT21

« on: December 14, 2018, 08:41:12 pm »

Thank you Ian....

8

Technical Support / Re: ADS-B connection to Trig TT21

« on: December 14, 2018, 12:46:55 pm »

Gents
Thank you for information,most kind.

Tony
your invitation to send the wire/lead
With pins to you to crimp would be appreciated.
Here is my email colin.xxxxxxxx(will send)
And mobile.07 xxxxxxxxI(willsend) If you can make contact with
Your details. That would be great 👍
Thanks again to all
Regards
Colin

9

Technical Support / ADS-B connection to Trig TT21

« on: December 13, 2018, 04:52:59 pm »

Hi everyone
Can anyone give me some direction on
Crimping the GPS /Earth wire to the pins
On the D connector.
I understand that a 4pin Crimper is required
Which I believe is an expensive Tool.Any suggestions
Where I can get these wires crimped.
Also do I need a tool to insert the pin in the connector
Or is it the case of just pushing the pin in?
Many thanks for any help
Colin

 

10

General Discussion / Running Skydemon and Airbox Runway HD at the same time

« on: January 13, 2018, 09:04:43 pm »

Can you run Skydemon and Airbox Runway HD on 2 separately tablets
During the same flight ??