1
Technical Support / Re: warning message
« on: March 15, 2018, 03:51:23 pm »
Hi
Its in the paw pages under logging.
Cheers
Brod
Its in the paw pages under logging.
Cheers
Brod
Show Posts
You can view here all posts made by this member. Note that you can only see posts made in areas to which you currently have access.
Pages: [1]
2
Technical Support / warning message
« on: March 15, 2018, 03:36:38 pm »
Hi
In the logging section I keep getting a warning come up.
It says "warning - adsb interface", it happens intermittently.
The home page also goes red on adsb part.
I have tried a different aerial but that makes no difference.
In the logging section I keep getting a warning come up.
It says "warning - adsb interface", it happens intermittently.
The home page also goes red on adsb part.
I have tried a different aerial but that makes no difference.
3
Technical Support / Re: Stopped working
« on: August 16, 2017, 07:41:31 pm »
Thanks Peter contact made.
4
Technical Support / Re: Stopped working
« on: August 16, 2017, 05:19:06 pm »
Ok removed bridge and dongles, 5.145v at polyfuse and 0.185
The other side. Still no lights.
The other side. Still no lights.
5
Technical Support / Re: Stopped working
« on: August 16, 2017, 04:47:17 pm »
Hi all
Power lead is one supplied, and I am getting 5+v at one side of polyfuse but less than .2v at the other side.
The power supply I have been using is an apple ipad one rated @ 5.1v 2.1a.
Power lead is one supplied, and I am getting 5+v at one side of polyfuse but less than .2v at the other side.
The power supply I have been using is an apple ipad one rated @ 5.1v 2.1a.
6
Technical Support / Re: Stopped working
« on: August 16, 2017, 03:07:17 pm »
Hi Peter,
Tried the sd card but still the same, no lights on at all.
Brod
Tried the sd card but still the same, no lights on at all.
Brod
7
Technical Support / Stopped working
« on: August 16, 2017, 12:00:38 pm »
Hi all,
Plugged into power supply which is 5.1v 2.1a, worked to register then I turned off and it wouldn't work again for hours then came to life
again, paired with my ipad, switched off and it wont work again. I have left it for hours now but get nothing when power is added.
Plugged into power supply which is 5.1v 2.1a, worked to register then I turned off and it wouldn't work again for hours then came to life
again, paired with my ipad, switched off and it wont work again. I have left it for hours now but get nothing when power is added.
Pages: [1]