Messages

1

Technical Support / Altitude offset in ADSB and mode C transponder

« on: January 16, 2020, 10:58:44 am »

Detecting ADSB and mode S on SkyDemon Altitude dysplayed is between 100 and 200 Fts lower than the real one .
I did lot of test and each time I have altitude error.
Is there a way to set up an offset altitude in PAW or SD

2

Technical Support / Re: SkyDemon unable to connect to PAW - initially and then it works

« on: May 06, 2019, 07:44:35 pm »

I have experienced same issue with SkyDemon
On ground trying to connect PAW to SKYDEMON as Pilotaware device it doesn’t work, as Rob said SD wait for device connection.
It works perfectly connecting PAW to SKYDEMON as Flarm device.

3

Technical Support / Re: Pilotaware connecting to Skydemon

« on: February 06, 2019, 08:27:53 am »

Same issue for me. I post about it few month ago, even with your advices I didn’t succeed
I have to connect it as Flarm device,

once it has been connected as Flarm I can switch to Pilotaware and it work, but time to time the link is lost.
I have the last version Pilotaware software and last version of SD

4

Technical Support / Re: Pilotaware connectivity with Skydemon

« on: April 13, 2018, 11:37:34 am »

Yes I tested it with IPhone as well.
It works fine with Flarm mode, iis there no more things, data’s etc ... with PAW mode?

5

Technical Support / Re: Pilotaware connectivity with Skydemon

« on: April 13, 2018, 06:41:13 am »

Yes Indid a reformât of SD card and install’the Last software as described in the manual.
About reinstalllation everything works as described.
If it’s Iphone or IPad wich blocks UDP mode do you know the way to solve it?

6

Technical Support / Re: Pilotaware connectivity with Skydemon

« on: April 12, 2018, 06:24:31 am »

Thanks, I’m going to check it?
Is there a way to solve issue?

7

Technical Support / Re: Pilotaware connectivity with Skydemon

« on: April 11, 2018, 01:09:53 pm »

Hello gentlemen do you have any id a about the problem

8

Technical Support / Re: Pilotaware connectivity with Skydemon

« on: April 04, 2018, 06:19:52 pm »

Hi Peter
I did what you told me, but it doesn't work in UDP mode (cf screen shots)
But in the other mode it seems working well.
What do you think?

9

Technical Support / Re: Pilotaware connectivity with Skydemon

« on: April 01, 2018, 08:03:27 pm »

Thanks, I am going to follow your instructions
I will be back soon

10

Technical Support / Re: Pilotaware connectivity with Skydemon

« on: March 31, 2018, 08:19:20 pm »

Hi
APP download but I don’t how to run it.
Sorry but I’m not familiar with such of software.

11

Technical Support / Re: Pilotaware connectivity with Skydemon

« on: March 28, 2018, 09:58:18 pm »

I did what you said, but nothing new, it still work with Flarm connectivity option but doesn’t with PilotAware connectivity option.
Please have a look on attached shot and tell me if there is mistake somewhere

12

Technical Support / Re: Pilotaware connectivity with Skydemon

« on: March 20, 2018, 07:56:06 am »

Thanks for advice regarding licence key
Instead of micro SD, is it possible to do a full installation with USB key as I usually do for update?

13

Technical Support / Re: Pilotaware connectivity with Skydemon

« on: March 19, 2018, 12:28:30 pm »

Hi
I have the last software (January 2018), what do you mean by « full installation » is it something different than time to time update?
If it’s different,  tell me how to do it?
Thanks in advance

14

Technical Support / Re: Pilotaware connectivity with Skydemon

« on: March 18, 2018, 03:02:54 pm »

It happens each time I try to connect PAW to SD.
Is there a way to switch on PAW and SD,I mean is it important to switch on Paw first or not?
What about others options as connectivity options or more?
Ididn’t got any advise from SD OPS, they told me to contact Flight aware producer.
Thanks in advance for your support.

15

Technical Support / Re: Pilotaware connectivity with Skydemon

« on: March 16, 2018, 05:03:08 pm »

Home page