PilotAware
British Forum => Technical Support => Topic started by: Admin on September 11, 2016, 03:23:31 pm
-
(from a user)
I think I have a problem 3 times I have used it with skydeamon and end up with another a/c in the same position as me 0 0 I have to drop 500 ft to clear but no exit track for it just disappeared the last ones reg started gce is there a glitch in the program ?
Can I have done this on the setup ?
-
What you are describing soundslike the first attempt at Mode-S display using a piggyback aircraft in SD.
If you update to the latest version of SkyDemon and PilotAware (20160820 or later)
This will now be represented as a ring around your A/C
To update is pretty trivial to do, please download the manual from here
http://forum.pilotaware.com/index.php/topic,468.0.html
and refer to the section
Automatic Software Upgrade
-
This can also occur if your aircraft has ADS-B out and the ICAO hex coffee is not set correctly in both the PilotAware and the transponder.
-
...ICAO hex coffee....
If that defaf? :-)
-
...ICAO hex coffee....
If that defaf? :-)
I knew I shouldn't have sent that from a phone...!