PilotAware

British Forum => Technical Support => Topic started by: comanchebob on August 04, 2018, 12:02:47 am

Title: Low audio level
Post by: comanchebob on August 04, 2018, 12:02:47 am

Rosetta working great but audio level (set at 10) is very low compared to my old device using the same input. Any sussestions?

Title: Re: Low audio level
Post by: Ian Melville on August 04, 2018, 08:08:06 am

1. Direct feed into an Audio panel or intercom
2. Bluetooth Adaptor with appropriate headset.
3. Feed a small amplifier.

If you check through the forum, you should find reports on this.

Title: Re: Low audio level
Post by: Keithvinning on August 06, 2018, 05:04:45 pm

Hi

There should be no difference in the volume between the Pi 2B used in the Classic and the 3B used in the Rosetta. What are you feeding it into?

Some folks get  good results putting the following amplifier in series. It has a volume control and is not expensive

https://www.amazon.com/Neoteck-Headphone-Amplifier-Rechargeble-Computers/dp/B01MS22YWV (https://www.amazon.com/Neoteck-Headphone-Amplifier-Rechargeble-Computers/dp/B01MS22YWV)

Anyone else have any experience they can share?