PilotAware
British Forum => General Discussion => Topic started by: Dpark on September 07, 2016, 04:16:04 pm
-
On the side of the PilotAware there are three input sockets one is the USB power input the other two look like HDMI and Audio inputs , is this correct and how would you use them?
-
The HDMI cable is to connect to a monitor to be able to see the software and is useful for debugging if you are an expert. Not for general use
The 3.5mm cable is used as the audio output for the voice alerts as explained in the operating instructions available from pilotawarehardware.com (http://pilotawarehardware.com)
Hope this helps
Cheers
Keith
-
On the side of the PilotAware there are three input sockets one is the USB power input the other two look like HDMI and Audio inputs , is this correct and how would you use them?
The HDMI output, is only currently used for diagnostics/testing
The Audio (output) provides spoken audio warning messages for traffic, this can be connected to your intercom/headset in order to have audio alerts to draw your attention to the navigation screen
-
Thank you all.
Understood