PilotAware

British Forum => Technical Support => Topic started by: andykmoore on March 13, 2024, 12:52:05 pm

Title: Default HEX ID (FX)
Post by: andykmoore on March 13, 2024, 12:52:05 pm

I intend to use the Pilotaware FX in a number of aircraft ... changing the HEX ID appropriately.

There is a distinct possibility that I will want to change it back to the "default" (e.g. an old, unregistered, glider which does not have a HEX code assigned).
One thing I did not do was note the "default" (before I changed it) - how can I work it out?
I know it will be of the form Fxxxxx - is "xxxxx":
- Last 5 digits of the serial number
- Last 5 digits (octets) of the MAC address
- ... or something else

Thanks

Andy

Title: Re: Default HEX ID (FX)
Post by: Admin on March 13, 2024, 10:30:39 pm

Enter 6 zeros
000000

This will go back to default
Thx
Lee

Title: Re: Default HEX ID (FX)
Post by: andykmoore on March 14, 2024, 10:09:59 am

Lee,

Thanks ... simple when you know how.

Regards

Andy