PilotAware

British Forum => General Discussion => Topic started by: tfede on October 24, 2015, 09:02:00 pm

Title: Airnav pro no flarm connection
Post by: tfede on October 24, 2015, 09:02:00 pm: Hi all,

does anyone have problems in connecting FLARM in Airnav Pro ?

All my settings are ok but i think i am forgetting something, when i switch FLARM to on in Airnav Pro the indicator changes to yellow for a while and than to red. This happens cyclically and never ending.

Federico
Title: Re: Airnav pro no flarm connection
Post by: Joerg on October 25, 2015, 10:46:38 am: Hi Federico,

I have the same problem then You descriped.
I got it working 2-3 times with Air Nav Pro. But after
some seconds the connection was lost again.
I ordered a different dvbt stick to check if that helps.

Will let You know when it arrived and I have tried it.

BR
Joerg
Title: Re: Airnav pro no flarm connection
Post by: iang on October 25, 2015, 01:26:17 pm: May I suggest you download the latest pi software from the Pilotaware site especially if you downloaded it not long after it was uploaded by Lee as it was shortly replaced with a more reliable version (same version number) - I found this solved all my problems with getting the system to work (well not quite as I have an aerial issue).

iang
Title: Re: Airnav pro no flarm connection
Post by: Joerg on October 26, 2015, 11:34:57 am: My Version is from the 19th October, so the latest I think.
Title: Re: Airnav pro no flarm connection
Post by: Admin on October 26, 2015, 01:07:32 pm: I have seen these problems also.

The following works for me.

1. Connect WiFi PilotAware
2. Startup Air Nav Pro
3. Go to Configuration->Sensors->Flarm-Connect
3.1 Slide sensor to OFF (green to grey)
3.2 Delete Pin Code and re-enter: 6001
3.3 Delete IP Address and re-enter: 192.168.1.1
3.4 Delete Port Number and re-enter: 2000
!!!!! Even if the values are correct, they must be removed and re-entered !!!!!
4. Slide sensor to ON
5. Go to Map

I have no idea why this is, but it works for me every time when I do this
Let me know if this works for you

Thx
Lee
Title: Re: Airnav pro no flarm connection
Post by: tfede on October 27, 2015, 12:35:36 am: thx lee, this way it works !

Federico
Title: Re: Airnav pro no flarm connection
Post by: Admin on October 27, 2015, 11:18:58 am: Quote from: tfede on October 27, 2015, 12:35:36 am
thx lee, this way it works !

Federico

I did report this to the folks at AirNavPro, maybe some more reports will get this fixed ?
Thx
Lee
Title: Re: Airnav pro no flarm connection
Post by: tfede on October 27, 2015, 05:42:41 pm: I will report the same but frankly speaking, i never got an answer from their "custmer suport"...

I'll let you know

Federico
Title: Re: Airnav pro no flarm connection
Post by: Admin on October 27, 2015, 06:49:18 pm: Quote from: tfede on October 27, 2015, 05:42:41 pm
I will report the same but frankly speaking, i never got an answer from their "custmer suport"...

I'll let you know

Federico

They also have a facebook page which people post issues

Thx
Lee
Title: Re: Airnav pro no flarm connection
Post by: Joerg on October 27, 2015, 07:33:39 pm: Thx Lee, it's working for me too!

Joerg