PilotAware

British Forum => General Discussion => Topic started by: dougblair on October 06, 2015, 03:46:39 pm

Title: Digole Regulators
Post by: dougblair on October 06, 2015, 03:46:39 pm

Hi my Digole Regs have arrived at last.  How do I check that they are 3.3v and not faulty.  The jumper is open circuit but I could do with knowing which pin to check for 3.3v
Doug

Title: Re: Digole Regulators
Post by: Admin on October 06, 2015, 04:07:42 pm

if you have a multimeter, test across the two terminals labeled JMP, it should be open-circuit
Also make sure it has the 3.3v regulator chip on-board, and is not strapping the 5v supply to
the top left pin of the ARF