PilotAware

British Forum => General Discussion => Topic started by: Wadoadi on October 01, 2015, 01:44:25 pm

Title: Whats not working ARF or the Rx
Post by: Wadoadi on October 01, 2015, 01:44:25 pm

hI,
 I ordered the bits as shown in this thread http://forum.pilotaware.com/index.php?action=post;topic=70.15;last_msg=1057 (http://forum.pilotaware.com/index.php?action=post;topic=70.15;last_msg=1057) I connect the Small board to the USB cable and connect a terminal to it at 9600,8,1,n then boot my PA up and I see a few line of corrupted text (like the Baud rate is wrong) on the terminal running on the PC and then nothing! I get the same "pattern" of text received each time i cold boot PA.

I only see the lines of text when cold booting the PA box. So is the PA not transmitting or is the dongle on the PC not receiving displayable text!

The PA log shows connected to the ARF at 9600 and transmitting ever 2 seconds approximately...

the tex i see on the terminal is:

Code: [Select]

,üÿ!_ý,ü¦!§Ý!:1T
5{“KRÈ¥LM¥Š
);JëLõ±=¶JýˆíÕ„§óÿ)1µŠ|QM”ž1äÈ5q¡+
!+»L!¡=!‡H»H!ùˆ€!"õȘ=!
넦
)|1Õ_!­ŠÌ9Ê!­L!Zž=Š!)ǵŠÆH
1f)ÆÖ)!l)œÞ!ÕÎ)Kd)Êœ¢yY”Ý{…€µ¦DÅŽLwÿÜ;!1[[ü»¡)ÿ3ýø!-51ÖÈŽ14!ÐìŒ͈H¡Í÷h<¥Øœf
è0ôþµZ!›1œñ¥!›üV!)ù)Ø!ýÿ!
½òÕ ©ú]!¾!¼úò!rüþ961Îþ9¬^Õ…ü…üÅÿÿöÈ¡:©ëœÚíÿù1àýÅ àýò8›«!½œ›tH)›ÙyÍ’¡y9ÿy…)2¡ßþô{þñŒþyÙ!Íß!÷¥Ñ[;!ÿ␭_Ȑ…

Zÿ¿R„Òþñèõ¹)z !lø;!ð¸ý8ü3ùØü9ÿ×ý­”Y1ÿ9!ÿ¥ÿ)˜-Åô0ør1
ÿº™)cüsLÏù¥ÿ 1øÑ !Íÿ¥Ñ!ÿ:1=ðxÌ©ý‰´)ÝLþ:1<ðxÌ¡ý¥ïþõüý:1=ðxΩýüþU:1<ð݈þxΡý-äUŽÙÿëå x‚)\7ÿ))—Щ;È[ÿ~üþ)œèÿÿÿÿÿ)1Iÿÿiÿ1Zü1Züñtÿ+++

Title: Re: Whats not working ARF or the Rx
Post by: Admin on October 01, 2015, 02:03:05 pm

Let me answer on the original thread ...