Messages

76

Technical Support / Re: ATOM Grid not connecting to Server

« on: January 22, 2023, 02:29:17 pm »

Hi Neil

I made a monumental screw up in the last day
About 35 stations are affected, we are trying to resolve but may need your assistance
I will give you an update in a few days

In the meantime, if you can email your password to me, I may be able to get in and resolve

Thx
Lee

77

Technical Support / Re: Sharing Internet Connection

« on: January 22, 2023, 02:26:57 pm »

Hi Colm

I think what you are asking is possible with iGRID
Take a look at piloaware.com to read up
If you connect pilotaware to a router/hotspot, it can be enabled as a router itself, so any client can access the internet

Thx
Lee

78

General Discussion / Re: National Standard for EC

« on: December 30, 2022, 02:28:49 pm »

I especially like the section that says typical range of a skyecho is
40 nm
In what alternate reality is that ?

Even with 12db gain antenna, on the ground we rarely see 5nm
I would like to know the source of that data

79

Technical Support / Re: GSM box showing red

« on: December 04, 2022, 02:27:50 pm »

Ever since I added the new wifi dongle it’s played up. It is making RunwayHD freeze. I can see other traffic, but I don’t move. Have just tested this in a lap in the car and icon stayed static.
Can I force it to go back to a previous download?
I start my night qual tomorrow and would rather have it working.
Thanks in advance

Can you post a screenshot of your
configure and home page please
Thx
Lee

80

Technical Support / Re: Pilotaware gps stops working

« on: November 30, 2022, 03:29:44 pm »

Hi David

a flight track and an approximate time of the incident, would allow us to try and debug the issue

Thx
Lee

81

Technical Support / Re: 987 Mhz antenna instead of 869.5Mhz

« on: November 29, 2022, 08:47:20 pm »

Hi Pete
Im afraid it would be very inefficient
Thx
Lee

82

Technical Support / Re: Is it OK to power up Rosetta with no Antennas connected?

« on: November 21, 2022, 07:55:46 am »

Hi Tim
That is correct
Base station capabilities are fulfilled by the ATOM basestation
Thx
Lee

83

Technical Support / Re: Pilotaware gps stops working

« on: November 20, 2022, 06:45:32 pm »

Hi David

That all sounds very odd
A controller will only see your mode S data anyway, NATS do not have any infrastructure for ADSB
Thx
Lee

84

Technical Support / Re: Corrupted track files?

« on: November 18, 2022, 03:55:39 pm »

@smaragd

I notice you are not running the most upto date release right now which is 20220805

There were some fixes associated with logging, can you update and see if this resolves this issue ?

thx
Lee

85

Technical Support / Re: Corrupted track files?

« on: November 17, 2022, 10:20:44 pm »

I think this is an issue with dos line endings
If you have access to linux, can you try running the file through “dos2unix”
This fixed another file I saw loaded into aircrew

86

Technical Support / Re: Dead PilotAware

« on: November 10, 2022, 08:55:05 pm »

I dont quite understand the fault
Was it the sd card or the dongle ?
And if the dongle there is still an issue to be replaced?

Thx
Lee

87

Technical Support / Re: Dead PilotAware

« on: November 06, 2022, 09:25:25 am »

Hi Graham
The unit has an hdmi socket near to the power socket
Are you able to connect to a monitor/tv. This should give an indication of whether the main board is alive or dead
Thx
Lee

88

Technical Support / Re: Just updated - Radar screen not working

« on: October 24, 2022, 08:11:28 am »

Actually something strange is going on
Many of the contacts are described as flarm, which does not sound correct
Please describe your entire setup in detail

Thx
Lee

89

Technical Support / Re: Just updated - Radar screen not working

« on: October 24, 2022, 08:06:39 am »

Hi James

In the positional contacts settings
Set the options to the widest settings both vertical and horizontal
This will enable all traffic to be sent, without pre filtering

Thx
Lee

90

Technical Support / Re: help connecting to Dynon skyview

« on: September 30, 2022, 11:22:11 am »

Which serial device do you have?
This should be bare wire not a db9 connection