Messages

16

General Discussion / Re: PAW Classic/Rosetta

« on: July 07, 2019, 11:55:51 am »

Hi Lee,
Thx for the reply, I think I'll stick with my classic and update the software.
Cheers
Chris

17

General Discussion / PAW Classic/Rosetta

« on: July 07, 2019, 11:16:31 am »

Hi, I have the PAW classic and would like to know if the latest software update will give me the same tools as the Rosetta. If not, what is the difference between the classic and Rosetta.
Cheers
Chris

18

General Discussion / Re: Flarm mouse

« on: October 03, 2017, 06:23:57 pm »

Thanks Peter, will let you know.
Cheers Chris

19

General Discussion / Re: Flarm mouse

« on: October 03, 2017, 04:12:41 pm »

Hi Lee,
Many thanks for info, will do some homework.
Chris.

20

General Discussion / Flarm mouse

« on: October 03, 2017, 12:42:55 pm »

Hi, can anyone point me in the right direction as to which flarm mouse I would need to connect to my PAW
Many thanks,
Chris.

21

Technical Support / Re: Wifi connection problem

« on: October 02, 2017, 04:54:19 pm »

Hi Lee,
That worked a treat😀
Many thanks.
Chris

22

Technical Support / Wifi connection problem

« on: October 02, 2017, 04:14:25 pm »

Hi, can anyone help me please. With paw powered up I then go into settings on my iPad and select pilot aware wifi connection which in turn shows I am connected I then attempt to connect to 192.168.1.1 and my iPad and my phone state that I have no connection to the Internet.
Can anyone please advise me.
Many thanks.
Chris

23

Technical Support / Re: Connecting Trig21 to PAW

« on: December 22, 2016, 09:33:26 pm »

Hi Guys, changed the usb to trig transponder configuration and it did the trick, so once again thanks for advice.
Cheers chris

24

Technical Support / Re: Connecting Trig21 to PAW

« on: December 20, 2016, 01:53:17 pm »

Hi  Guys,
It's very much appreciated the advice you've given and has definitely helped with a better understanding with what's required. I'll get back to you with the results.
Chris

25

Technical Support / Re: Connecting Trig21 to PAW

« on: December 19, 2016, 09:43:05 pm »

Hi, many thanks for your response I will sort out the connections and the baud rate and should be up and running.
Cheers Chris.

26

Technical Support / Connecting Trig21 to PAW

« on: December 19, 2016, 06:38:46 pm »

Hi, can anyone please advise me about how to connect and configure the PAW to my trig21. I have attempted to connect the RS232 cable using the orange and black wires, when connected I have flashing lights at the USB end. I have the PAW Usb set to auto. The trig is set up with NMEA with a speed rate of 4800, but trig shows a warning of no ADS B. I have 4 green boxes and 7/8 satellites showing.
Many thanks.
Chris