PilotAware

British Forum => Technical Support => Topic started by: SimonM on March 01, 2018, 11:18:31 pm

Title: Aircraft visible on one tablet but not another
Post by: SimonM on March 01, 2018, 11:18:31 pm

Two tablets both running SkyDemon and both connected to the same PAW unit. One shows an alert, the other doesn't

Can anyone give a reason why the alert didn't show on the 2nd screen?

Title: Re: Aircraft visible on one tablet but not another
Post by: Ian Melville on March 02, 2018, 06:35:45 am

Most likely you have the SkyDemon filters set differently? I have also seen it when there is a very high number of targets.

Title: Re: Aircraft visible on one tablet but not another
Post by: exfirepro on March 02, 2018, 09:42:07 am

Simon,

I agree with Ian, most likely a different setting in SkyDemon/Settings/Navigation Options, - e.g. Show within Vertically +/-

Also possible if it was a 'Bearingless' Mode C/S target (which shows as a coloured ring), that you don't have 'Show Bearingless Targets' selected on one of your devices (in the same Dropdown as above)

Regards

Peter