Show Posts

You can view here all posts made by this member. Note that you can only see posts made in areas to which you currently have access.


Messages - G-JBVP

Pages: [1] 2
1
Technical Support / Re: Latest Firmware Update
« on: August 27, 2022, 03:28:25 pm »
No says unable to connect.

Ashley is currently helping me with the problem via email so hopefully will get sorted.

2
Technical Support / Latest Firmware Update
« on: August 26, 2022, 05:15:16 pm »
Help:-

Tried to update today using PAW app which has worked perfectly fine in the past.
PAW was working fine before attempted update
Downloaded new firmware
Upload to Pilot Aware appeared to work OK
Restart didn't work through the app so restarted by powering off/on
After restart checked setup through browser and old version of firmware still showing
Powered off/on to recycle and now can see PAW wi-fi but cannot connect trough browser using 192.168.1.1 or paw.local and obviously no connection to SkyDemon.

The unit is origianl classic unit with software licence to April 2023

3
Technical Support / Pre-Loaded SD Cards
« on: June 25, 2019, 04:08:51 pm »
When do you expect to have the preloaded SD cards to be available on your "Products" page, guess there will be a charge, do you know yet how much?

Thanks
Brian

4
Technical Support / Re: iPad traffic warning + background noise
« on: February 09, 2018, 01:52:17 pm »
That would be neat if sound could be reproduced on IPad

5
Technical Support / Re: iPad traffic warning + background noise
« on: February 07, 2018, 05:31:03 pm »
Hi Lee

Yes using SkyDemon and it is a black banner reporting traffic behind.

Brian

6
Technical Support / iPad traffic warning + background noise
« on: February 07, 2018, 02:15:46 pm »
Installed new software and flew with it for a few hours, IPad visual warning of traffic flashes up and disappears very quickly so difficult to read warning, is there a way to extend time period warning is displayed and is this an IPad or PilotAware setting if it can be user adjusted.
Also noticed background noise over radio both tx and rx (similar to fast heartbeat) fairly sure it wasn’t there before the upgrade.

7
Technical Support / Re: Spurious contacts
« on: August 14, 2017, 04:31:57 pm »
Peter

Not that familiar with Dropbox but I think I have done it, should be 3 track files

Brian

8
Technical Support / Re: Spurious contacts
« on: August 14, 2017, 08:59:50 am »
Hi Lee

Have downloaded a couple of tracks but files to big to send over the forum, can you send me your email address for me to send them over.

FYI flew for 4+ hrs yesterday and only had one of these spurious contacts about an hour into the first leg of my flights so leave it with you as the whether it's worth spending any more time investigating.

Brian

9
Technical Support / Re: Spurious contacts
« on: August 11, 2017, 02:13:25 pm »
Hi Lee

Didn't fly today just ran these off while I was at the airfield, will send track log next time I fly

Brian

10
Technical Support / Re: Spurious contacts
« on: August 11, 2017, 11:12:48 am »
Lee

PDF's of various screenshots attached.

2 of 2 posts

Brian

11
Technical Support / Re: Spurious contacts
« on: August 11, 2017, 11:08:47 am »
Lee

PDF's of various screenshots attached.

1 of 2 posts

Brian

12
Technical Support / Re: Spurious contacts
« on: August 08, 2017, 08:55:03 am »
Lee

ModeCS+filter option is selected.

Brian

13
Technical Support / Re: Spurious contacts
« on: August 07, 2017, 08:35:04 pm »
Yes mode S I have setup our transponder code to be filtered out, perhaps should have mentioned using Skydemon

14
Technical Support / Re: Spurious contacts
« on: August 07, 2017, 12:50:31 pm »
Lee

Bŷ spurious I mean giving a warning of very close proximity red warning circle showing 0 feet height difference, looked like reg started with G but could be a C.
I will send you a screenshot of PAW & Config screen when I next fly.

Brian

15
Technical Support / Spurious contacts
« on: August 06, 2017, 06:14:30 pm »
Have been getting spurious contacts showing aircraft Reg as G-OO2D or various last two letters G-OO?? With contact at same height and position as my aircraft with red warning circle.

Any ideas what's causing this?

Pages: [1] 2