1
Technical Support / Re: Change aircraft symbol
« on: December 08, 2016, 09:57:58 am »
Peter
AirNavigation Pro. My own aircraft is shown with a aircraft symbol.
AirNavigation Pro. My own aircraft is shown with a aircraft symbol.
Show Posts
You can view here all posts made by this member. Note that you can only see posts made in areas to which you currently have access.
Pages: [1]
2
Technical Support / Change aircraft symbol
« on: December 07, 2016, 08:14:52 pm »
How do I change the aircraft symbol from a triangle to something more aircraft-like or even a custom-made symbol?
3
Technical Support / Re: Can't connect WiFi to RPi
« on: December 01, 2016, 10:41:28 am »
exfirepro
OK, thanks for your input.
Lee
I ran update, upgrade and autremove and then a lsusb and on one line it says
Bus 001 Device 006: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
It seems to me that this WiFi dongle is not the right one, or ...?
OK, thanks for your input.
Lee
I ran update, upgrade and autremove and then a lsusb and on one line it says
Bus 001 Device 006: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
It seems to me that this WiFi dongle is not the right one, or ...?
4
Technical Support / Re: Can't connect WiFi to RPi
« on: November 30, 2016, 08:47:43 pm »
exfirepro
Yes, but it should work just the same.
hcccs
Yes, but it should work just the same.
hcccs
5
Technical Support / Re: Can't connect WiFi to RPi
« on: November 30, 2016, 07:05:57 pm »
I can't see the PilotWare on my iPad as a unit coming in.
There are lines in the log which might give a clue:
Error for wireless request "Set Tx Power" (8B26)
Set failed on device wlan0: Operation not permitted
### WiFi ssid= PilotAware-B827EBFF4066
etc ...
There are lines in the log which might give a clue:
Error for wireless request "Set Tx Power" (8B26)
Set failed on device wlan0: Operation not permitted
### WiFi ssid= PilotAware-B827EBFF4066
etc ...
6
Technical Support / Can't connect WiFi to RPi
« on: November 30, 2016, 10:53:17 am »
I have installed all the HW and SW and when loading the RPi I get a login prompt which they say I should ignore. I tried to connect from my iPad 192.168.1.1 but that is the IP address of my home router. I looked in the router list of units connected and I can't see the RPi. I'm sure I have the right WiFi dongle http://www.ebay.co.uk/itm/252432669588?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT , it has Chipset: RT5370. What else is there to check? Assistance please!
Pages: [1]