1
General Discussion / Re: My Pilot Aware arrived today
« on: May 17, 2016, 08:49:48 pm »Maybe I can con my brother into taking me up as a passenger so that I can test this on Sunday... May win him over too!
Bone idée! The more the merrier!
Show Posts
You can view here all posts made by this member. Note that you can only see posts made in areas to which you currently have access.
Pages: [1] 2
Bone idée! The more the merrier!
2
General Discussion / Re: Operational documentation
« on: May 17, 2016, 08:48:20 pm »
Thx.... I'll have a play.
3
General Discussion / Re: Operational documentation
« on: May 17, 2016, 07:43:41 pm »
As stated above, it's the onscreen traffic alerts I was wanting to config
4
General Discussion / Operational documentation
« on: May 17, 2016, 07:08:09 pm »
Where is the operational documentation that's mentioned in the doc linked from this thread?
I want to know how to configure the on screen warnings in SkyDemon
Thx,
Paul
I want to know how to configure the on screen warnings in SkyDemon
Thx,
Paul
5
General Discussion / Re: GPS Ublox7 Dongle connection problems
« on: May 17, 2016, 07:03:37 pm »
I haven't tried with the unit I got today, but with the unit I built about 3/12 ago, the GPS dongle was better than the iPad's own. How can you tell how many satellites it's picked up?
6
General Discussion / Re: My Pilot Aware arrived today
« on: May 17, 2016, 06:12:33 pm »
My QSG only had one side which explains my confusion. Thanks for the superfast response.... PAW now working with Skydemon.
7
General Discussion / Re: My Pilot Aware arrived today
« on: May 17, 2016, 05:37:17 pm »
I don't know whether I have some paperwork missing, but I only have a Quick Start Guide. The QSG mentions nothing about licence keys, nor how to connect to the internal webserver. However I guessed that the address would be 192.168.1.1 which seems to work but tells me that the licence key is expired. (the boxes for it are all zero.
What have I done wrong? I can'r immediately see any more paperwork and there's nothing on the emails that I received to help me
Paul
What have I done wrong? I can'r immediately see any more paperwork and there's nothing on the emails that I received to help me
Paul
8
General Discussion / Re: First Airborne test today
« on: December 04, 2015, 10:45:43 pm »We had a Helimed about 500metres from us on the ground at N.Weald that showed up on the display but no warnings on the screen. So if we had been in the air, perhaps looking out of the window we would have been oblivious, (unless we happen to see it).
I've not had decent enough weather when not at work to test the system in the air, but I live fairly close to Birmingham airport (about 3 miles away) and SkyDemon showed a "trajectory" bar against "Emirates 39" as it was on final.
9
General Discussion / Re: iPhone 6s not working?
« on: December 03, 2015, 09:52:26 pm »
What happens if you connect 2 devices at the same time (or try to)?
10
General Discussion / Re: Pi Zero and PilotAware
« on: November 29, 2015, 01:48:48 pm »I was saying to Dave earlier today, the new mini Pi might be useful for creating an PAW for drones.
Is there a business opportunity there? Licensing agreement?
11
General Discussion / Testing ADSB receipt
« on: November 29, 2015, 01:03:40 pm »
Unfortunately not the weather for airborne testing, so I set my device up inside. The location was on the floor (1st floor) at Coventry Airport so facing SE (140). I had SkyDemon set to pick up all altitudes (40K') and it was picking up traffic as far S as Southampton (+14.3) and as far north as Sheffield (+33.3).
I was quite impressed with that from that location.
Apols if this is considered noise.
Any news on the ARF/baro board?
Paul
I was quite impressed with that from that location.
Apols if this is considered noise.
Any news on the ARF/baro board?
Paul
12
General Discussion / Re: Wifi fails to initialise on boot up
« on: November 25, 2015, 07:27:51 pm »
Sorry if this is classed as noise, but now I've got the right WiFi dongle, the setup was a breeze. Traffic showing on SkyDemon.
Thanks all!
Paul
Thanks all!
Paul
13
General Discussion / Re: Wifi fails to initialise on boot up
« on: November 22, 2015, 05:17:40 pm »btw. I don't think your SD card can be read-only if you've got as far as you have!
Thx. I don't think it is either.
14
General Discussion / Re: Wifi fails to initialise on boot up
« on: November 22, 2015, 03:45:17 pm »
It's a B+ (or so it says on the box) and the software was PilotAware.20151114.
If I relieve myself of my eBay aversion and get the known good wifi dongle, will it work or will the setup have failed also (due to the bad dongle)?
If I relieve myself of my eBay aversion and get the known good wifi dongle, will it work or will the setup have failed also (due to the bad dongle)?
15
General Discussion / Re: Wifi fails to initialise on boot up
« on: November 22, 2015, 02:41:32 pm »
I've no idea what chipset it uses, but thought I'd selected it from the known good hardware list on here. It certainly works with NOOBs. Perhaps that's where I've gone wrong ad I will have ordinarily avoided eBay.
As for the card, it hasn't got a slider in it (do microSD cards have those?) The adapter does have a slider... sliding it makes no discernible difference. I've googled a fair bit and it's clear I'm not the only one with this issue related to SD cards, but non of the proposed solutions works.
Are some SD cards single write only? In fact this can't be true of this card because I added the PAW files, booted the pi and now there are two partitions so it's clearly been written to twice!
As for the card, it hasn't got a slider in it (do microSD cards have those?) The adapter does have a slider... sliding it makes no discernible difference. I've googled a fair bit and it's clear I'm not the only one with this issue related to SD cards, but non of the proposed solutions works.
Are some SD cards single write only? In fact this can't be true of this card because I added the PAW files, booted the pi and now there are two partitions so it's clearly been written to twice!
Pages: [1] 2