PilotAware
British Forum => General Discussion => Topic started by: captchaos on October 22, 2015, 02:33:21 pm
-
I have upgraded both my units to the latest version of PAW. One uses collisionaware for fix the other has USB GPS. The USB one is not showing the ident label on ADSB traffic. Is there a setting I need to change or is there some other problem?
-
I have upgraded both my units to the latest version of PAW. One uses collisionaware for fix the other has USB GPS. The USB one is not showing the ident label on ADSB traffic. Is there a setting I need to change or is there some other problem?
This is totally unrelated.
Are you sure both units are running the same version of PilotAware.
A quick test would be to put the USB GPS into the other unit.
-
I think I have spotted the issue, older versions of SD on one so I assume whilst it used to display hex code with previous PAW version, the older SD version doesn't handle new label. Trying now.
On a slave/master test I am getting -24/-34 with units 10 feet apart. Does that seem healthy?
-
I think I have spotted the issue, older versions of SD on one so I assume whilst it used to display hex code with previous PAW version, the older SD version doesn't handle new label. Trying now.
On a slave/master test I am getting -24/-34 with units 10 feet apart. Does that seem healthy?
-20/-20 is the best I have seen with my units 40 ft apart
-
Better than me then. I tried taking the DVBs out, with slight improvement with one out and worse with both out!
At 92m I am getting -54/-73 (with both DVB's plugged in)