1
General Discussion / Re: Stratux Case
« on: June 17, 2017, 09:04:31 pm »
Many thanks Peter
You can view here all posts made by this member. Note that you can only see posts made in areas to which you currently have access.
Well the power issue was/is with the battery connector on the battery. Have got it working now in my dining room and connects and working with SD ok.
Not sure on how to use the ATT20B and PAW together though, as ATT20B connects via GDL90 and PAW via FLARM on SD
Hi Sean,
Thinking a bit more about this. If you are tight for space, the most effective way would be to run the SkyEcho as a 'blind' transmitter and connect SkyDemon to your PAW. That way you will be transmitting ADSB and P3i and receiving/displaying ADSB, P3i, Mode C and Mode S from your PAW, plus of course the 'potential' to integrate gliders later if you need to.
Regards
Peter
Message to Seanjd
You can return your SkyEcho and get a barometer fitted, I would fully recommend this
https://forums.flyer.co.uk/viewtopic.php?f=1&t=102806&hilit=PilotAware&start=90#p1512518
Thx
Lee
Not sure on how to use the ATT20B and PAW together though, as ATT20B connects via GDL90 and PAW via FLARM on SD
Hi Sean
I think you will need 2 devices to run side by side
You could connect from a PC and connect to the radar screen or traffic screen on PAW
thx
Lee
Hi Sean
I am very interested to hear your findings.
It appears there is a serious flaw regarding the altitude reporting for skyecho,
This is due to the fact it has no barometric sensor
Details here
https://forums.flyer.co.uk/viewtopic.php?f=1&t=102806&hilit=Pilotaware&start=60#p1512134
Thx
Lee
Sean,
I presume you purchased it via the Amazon UK Marketplace? If so, what was the situation regarding UK Tax and Import Duty? I tried to find out whether these are covered by the quoted price but uAvionics haven't replied to my enquiry.
Regards
Peter