PilotAware

British Forum => Technical Support => Topic started by: Bulleteer on June 29, 2017, 07:44:47 pm

Title: Audio Out Jack - 3.5mm
Post by: Bulleteer on June 29, 2017, 07:44:47 pm

Is the audio out jack on the Pilot Aware a stereo or mono socket?

Title: Re: Audio Out Jack - 3.5mm
Post by: exfirepro on June 29, 2017, 08:16:22 pm

The jack is a 4-pole TRRS (tip, ring, ring, sleeve) stereo socket, but PilotAware audio outputs are mono - the same on both channels, so you can use a standard 3-pole lead to connect. See  previous post here http://forum.pilotaware.com/index.php/topic,376.msg5117.html#msg5117

There are also several other posts on this subject, but I can't currently find them.

Regards

Peter

Title: Re: Audio Out Jack - 3.5mm
Post by: Bulleteer on June 30, 2017, 10:05:04 am

Thanks Peter, just got my PA and wan to hook it up to my Dittel KRT2 radio. The other post will help with this as well. Much appreciated.

Mark

Title: Re: Audio Out Jack - 3.5mm
Post by: exfirepro on June 30, 2017, 11:32:06 am

Mark,

As you are using a Dittel KRT2, you would probably also benefit from reading this thread....

http://forum.pilotaware.com/index.php/topic,641.msg7854.html#msg7854

Regards

Peter