Thank you for the new release Lee.
The reboot was without the previous waning and fail message(s).
There was the Kernel lacking groups warning however I did get SDR USB Error Connect ......57600 baud
The WiFi link was made and selected Flamm on the Sky Demon
Then got:
Connect to Sky Demon
Attempting Connection
Error Connect()
Then saw
NAC TCP:Pin 6000
Msg $PLACA,S,NMEA OUT 61*69
I had a several attempts to connect Sky Demon ,all of which failed. I checkedthat both WiFi & Collision Aware were still sound.
Does that lead you to a solution?
Looking forward to your view. R
OK, This is good progress in highlighting the issue.
If you received "SDR USB Error", this points to a problem with the DVB-T Dongle which receives the ADS-B data, and would explain why you see no aircraft.
Can you also point your web browser to
http://192.168.1.1
on the device connected to the Pilotaware WiFi.
This should give some additional info, please take a snapshot and post the picture so I can take a look
Just rereading your post, it looks like previously skydemon would connect, but not show any aircraft, and now it apoears that skydemon will not connect, that is strange ....
Thx
Lee