Hi Lee,
I updated to 20160708, on Saturday having been on 20160530 previously.
Tried auto updating as outlined in the PAW Operations Manual using Option 1 (connect PAW unit to router, power up PAW and wait 20 mins before powering down). I tried this procedure twice but each time upon subsequently powering up PAW and logging into hot-spot via iPad noted that the software version was unchanged from 20160530.
So slight confusion here for me - When connected to the router will PAW automatically check for updates and download the new files, without having first pressed the Check for Updates button?
I tried the procedure once again, this time with the Wifi dongle disconnected. Upon re-checking, I'm still on 20160530 but noted this time that it said 20160708 was available! I pressed to download and went through the procedure again, this time with success
Can you please confirm that when using download option 1 ( and having first disconnected all dongles, as you suggest in your previous post in this thread), the likely result will be notification that an update is/isn't available, and you then have to select to download the update, and repeat the procedure a second time for the update to actually download?
NB. I Sussed out that I needed to change EasyVFR WiFly PIN code to 6002 (in Flarm settings), to restore traffic to the Nav screen.
Thx,
Chris