« previous next »
Pages: 1 ... 29 30 [31] 32 33 34

Author Topic: Ground Station  (Read 170821 times)

Keithvinning

Re: Ground Station
« Reply #450 on: July 03, 2018, 04:42:05 pm »
Hi Eric
Max length is about 10Metres. For the OGN you can actually us a USB extender.
If you put the pi in the Loft then 5 metres will be enough.
You need to put up 2 antennas though.
The internet is more than enough.
What is the antenna at the top not the YAGi

Keith
Logged

EricC

Re: Ground Station
« Reply #451 on: July 03, 2018, 07:19:22 pm »
Hi Keith

Prior to the internet, the antenna is question was for VHF Volmet WX.
l was able to check the WX from home before departing for Belfast in the C47 with the morning papers.
 
Regards Eric.



Logged

EricC

Re: Ground Station
« Reply #452 on: July 03, 2018, 09:59:12 pm »
P3i packets for today.


TX=29760   RX=544     CRC FAIL=1
Logged

EricC

Re: Ground Station
« Reply #453 on: July 06, 2018, 08:25:53 pm »
P3i packets for today.

TX=26676     RX=1004     CRC FAIL=6
Logged

Ben Smith

  • Engineering
  • Newbie
  • *
  • Posts: 39
  • Total likes: 1
  • Glider pilot, electronics engineer and Beekeeper.
    • View Profile
Re: Ground Station
« Reply #454 on: July 07, 2018, 09:06:05 pm »
Just got PWAldersh back up and running as there should be quite a lot of activity in the next few weeks with the EGLF air show on, today’s run is showing as
P3I Packets OK=1302 NG=0
I don’t know how to get the separate TX / RX figures that Eric gives, but at least it is working, I will try to improve the PW antenna in the next week if I can.
Logged

EricC

Re: Ground Station
« Reply #455 on: July 07, 2018, 09:45:54 pm »
P3i packets for today.

TX=28590     RX=1055     CRCFAIL=5

Hi Ben the figures are from the home page.  192.168.1.1
Logged

Ben Smith

  • Engineering
  • Newbie
  • *
  • Posts: 39
  • Total likes: 1
  • Glider pilot, electronics engineer and Beekeeper.
    • View Profile
Re: Ground Station
« Reply #456 on: July 07, 2018, 10:59:54 pm »
Eric,
Thanks for that, however that doesn’t appear to work with the standard OGNPAW ground station, the only ports appear to be 8080, 8081, 8082 (the PAW stats) and 3013 (basestation output) no homepage on the Pi that I can find.
Ben.
Logged

Ian Melville

Re: Ground Station
« Reply #457 on: July 07, 2018, 11:53:41 pm »
Eric is using a PilotAware, not OGN-R station. Different animals.
Logged

EricC

Re: Ground Station
« Reply #458 on: July 11, 2018, 08:21:45 pm »
P3i packets for today.

TX=25617     RX=1686       CRC FAIL=4
Logged

EricC

Re: Ground Station
« Reply #459 on: July 14, 2018, 09:18:44 pm »
P3i packets for today.

TX=22416     RX=4      CRC FAIL=0
Logged

EricC

Re: Ground Station
« Reply #460 on: July 16, 2018, 08:32:38 pm »
P3i packets for today.

TX=26415     RX=139     CRC FAIL.=0
Logged

EricC

Re: Ground Station
« Reply #461 on: July 17, 2018, 09:03:19 pm »
P3i Packets for today.


TX=27424     RX=768     CRC FAIL=1
Logged

EricC

Re: Ground Station
« Reply #462 on: July 19, 2018, 09:33:30 pm »
P3i packets for today.


TX=28404     RX=885     CRC FAIL=6
Logged

EricC

Re: Ground Station
« Reply #463 on: July 20, 2018, 08:04:01 pm »
P3i Packets for today.

TX=25449     RX=160     CRC FAIL=1
Logged

EricC

Re: Ground Station
« Reply #464 on: July 21, 2018, 07:20:58 pm »
P3i packets for today.

TX=24078     RX=276      CRC FAIL=3
Logged
Pages: 1 ... 29 30 [31] 32 33 34
« previous next »