The "Traffic" audio alert was coming from the EFIS. I could only disable it by turning off the GDL90 Tx on the PAW.
The EFIS was alerting to Traffic at a time when only ONE traffic item was being picked up by the PAW, a C/S Transponder. See here:
https://photos.app.goo.gl/bEdAAyG78d6aCtYK7Question 1: Are C/S transponder traffic contacts transmitted in the GLD90 Tx data stream?
Question 2: If yes, how can they be filtered out of this stream or would using one of the other Tx settings do this by default?
If the answer to Question 1 is yes, I suspect this C/S traffic data arriving at the EFIS may be the cause of the NULL traffic being displayed under the aircraft icon.
See full transcript of query to Advanced Flight Systems below.
Thanks again for your help.
Andrew.
RV7
EI-EEO
----------------------------
ADSB Nuisance audio "Traffic" warnings
Hello,
I have this week hardwired a PilotAware (
https://www.pilotaware.com/) unit into EI-EEO. It has ADSB traffic reception amongst its many capabilities. I have successfully connected it to the EFIS using one of the serial ports set to ADSB 115k.
The EFIS picks up the PilotAware Traffic and displays it correctly. Only issue is that it incessantly reports an audio "Traffic" warning - this may be because the EFIS is receiving traffic that has no bearing or range data (raw Mode C/S Transponder signals). See real example here that the EFIS was reporting as "Traffic". This was the only traffic the PilotAware was picking up at the time, and the EFIS was reporting an audio "Traffic" alert. The only way to stop the "Traffic" alert was to break the Tx GDL90 data stream from PilotAware.
https://photos.app.goo.gl/bEdAAyG78d6aCtYK7Q1. Is there a way to filter the audio "Traffic" warning for this scenario?
Q2. If I cannot filter, can I disable the warning, or outright delete the audio file?
Secondly and related, on the EFIS I see some NULL data showing up behind the self yellow aircraft ICON. See below photo for a maxed zoom of what it looks like. In this maxed zoom level, the Yellow Circle and two sets of noughts are not stationary, they are moving forward slightly in a cyclical manner, starting from behind/underneath the aircraft icon every three seconds or so.
Could this NULL traffic data be caused by traffic data records received that have null fields for bearing and range? i.e. the Mode S traffic shown above?
https://photos.app.goo.gl/rC1yYnUPxN4WFiaV9Q3. Is there a way to filter this out, as I am about to resize my aircraft ICON (make it smaller), and this NULL traffic signal around it will be a distraction.
I am in contact with PilotAware about this to see if it does indeed Tx all Traffic types as shown above and if so, whether it can be filtered in some fashion.
The reason I am going to all this trouble is that AFS is now supporting Airmate mapping/charts & plates and I have just purchased a subscription from them - though I am having issues with this too that Ken Chard is working directly with Airmate. Another topic
Thank you for your help,
Andrew.
RV 7
EI-EEO