Fitting the PilotAware into the Stratux V2 case.
Only do this if you have lots of time and are bored because the weather is preventing you from flying! Would I do it again? probably not. I would wait for availability from
http://forum.pilotaware.com/index.php/topic,1144.msg13827.html#msg13827So this is a very much abbreviated work list:
Case modified to allow PAW antenna exit.
Case modified by filing for cable access (to FLARM)
Remove excess from cable to allow FLARM cable ot fit.
File one case locating lug to allow complete case locking.
Drill 2 holes to enable clear view of lights.
One fan only under the USB ports.
Make sure the fan blows from the inside (expelling the warm air) otherwise the fan noise is excessive!
Parts from e-bay:
NooElec ADS-B Discovery 3dBi Antenna Bundle - 1090MHz & 978MHz Antenna Bundle
( 222628007053 )
V2 Black Case Dual Fans for Stratux ADS-B Kit Fits AHRS Module and GPYes
( 172874325753 )
Power source for fan as per:
http://forum.pilotaware.com/index.php/topic,1144.msg13827.html#msg13827Mike